Audio Technica AT-VM95SH/H Headshell/Cartridge Combo Kit
Audio Technica AT-VM95SH/H Headshell/Cartridge Combo Kit Audio Technica AT-VM95SH/H Headshell/Cartridge Combo Kit

Share:

Audio Technica AT-VM95SH/H Headshell/Cartridge Combo Kit

$228.99
 
 
 
Availability: Discontinued
In Stock An In Stock item is available to ship normally within 24 business hours.
Preorder A Preorder is an item that has not yet been released. Typically the label will set a projected release date (that is subject to change). If a projected release date is known, we will include this in the description in red. Other Preorders are set to release "TBA." This means that release date is yet "To Be Announced". The Preorder can be released anywhere between weeks, months or years from its initial announcement.
Out of Stock An Out Of Stock item is an item that we normally have available to ship but we are temporarily out of.
Awaiting Repress Awaiting repress titles are in the process of being repressed by the label. No ETA is available at this time.
Expected On When an item is Out Of Stock and we have an estimated date when our stock should arrive, we list that date on our website in the part's description.
Special Order A Special Order item is an item that we do not stock but can order from the manufacturer. Typical order times are located within the product description.
SKU:
AT-VM95SHH
UPC:
4961310146498

The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge pre-mounted on the AT-HS6BK headshell.

Features

  • VM dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
  • Compatible with any AT-VMN95 replacement stylus
  • Universal ½"-mount headshell for 4-pin turntable cartridges

Technical Specifications

Frequency Response 20-25,000 Hz
Channel Separation 23 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Nude square shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3 k ohms (1 kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Recommended load capacitance 100 to 200 pF
Output 3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance 1.5 dB (1 kHz)
Stylus Shape 2.7 x 0.26 mil Shibata
Cantilever Aluminum pipe
Mount Half-inch
Weight Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)
Dimensions Cartridge 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D; Cartridge & Headshell 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D
Replacement Stylus AT-VMN95SH
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Description

The AT-VM95SH/H combo kit includes the AT-VM95SH dual moving magnet cartridge pre-mounted on the AT-HS6BK headshell.

Features

  • VM dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
  • Compatible with any AT-VMN95 replacement stylus
  • Universal ½"-mount headshell for 4-pin turntable cartridges

Technical Specifications

Frequency Response 20-25,000 Hz
Channel Separation 23 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Nude square shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3 k ohms (1 kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Recommended load capacitance 100 to 200 pF
Output 3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance 1.5 dB (1 kHz)
Stylus Shape 2.7 x 0.26 mil Shibata
Cantilever Aluminum pipe
Mount Half-inch
Weight Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)
Dimensions Cartridge 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D; Cartridge & Headshell 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D
Replacement Stylus AT-VMN95SH
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
ISBN
ASSOC
A
Genre
If Can Be Discounted
YES
Discontinued
YES
Inventory
.00
Construct
0
Dropship
0
Record Speed Record Size
Artist
Title
Composer
Additional Artists
Record Weight
Record Speed
Multi Channel
Stereo
Mono
Colored
Picture Disc
1/2 Speed
DMM
Out of Print
Sell Hold/Repressing
Direct to disc
Creation Date
Release Date
Availability
Discontinued
Scratch & Dent
0
back to top