The T1 EVO Series adds the classic Ortofon OM 10 phono cartridge, a larger 'Debut-sized' sub-platter as well as electronic speed change for all models. The T1 EVO base model is a conventional manual turntable. It requires either an outboard phono preamp or a PHONO input on the receiving end.
T1 EVO - Your Introduction to High-Fidelity
The T1 EVO aims to deliver true high-fidelity sonics for vinyl enthusiasts on a limited budget. Boasting premium materials, stylish aesthetics and rich, lively sound quality, Pro-Ject's extensive development process has ensured no compromise to sonics in the design and build of T1 EVO. The stylish CNC-machined plinth (available in gloss black, satin white or satin walnut laminates) uses no plastic and is carefully manufactured to eliminate resonant hollow spaces that would otherwise detract from sound quality. 'Sound-first' principles are implemented throughout. The glass platter is heavy and non-resonant, again avoiding the flaws of plastic and cheap steel alternatives. Additionally, the purpose-selected turntable feet are highly effective in isolating the T1 EVO from ambient vibrations in the vicinity of your hi-fi system.
Audiophile Implements
T1 EVO's motor drives a belt attached to a larger sub-platter (Debut-sized!) which rotates in a bearing assembly machined to tolerances within 0.001mm. It's comprised of a stainless steel spindle in brass bushing. All told, the T1 EVO drive system ensures stable and accurate platter speeds with non-resonant behavior, allowing the tonearm and cartridge to perform their very best. The tonearm is an 8.6" one-piece aluminum design, meaning the headshell and armtube are integrated for the sake of rigidity and resonance control. High-quality bearings allow for silent and frictionless motion of the tonearm. Supplied with an Ortofon OM 10 moving magnet cartridge featuring an elliptical diamond stylus tip, this is a true hi-fi playback system with no corners cut! The cartridge is aligned, tracking force is set at the factory and anti-skating is built-in, sparing you the trickiest parts of turntable setup so that you can be spinning vinyl in mere minutes.
Features
- Electronic speed change
- Pre-adjusted Ortofon OM10 cartridge
- Larger anti-resonant sub-platter (Debut-sized)
- Heavy 8mm-thick low-resonance glass platter
- CNC-machined chassis (no resonant hollow spaces!)
- 8.6" one-piece aluminum tonearm
- Low-friction, vibration-free tonearm bearing
- Low-capacitance Connect it Phono E RCA cables
- Vibration-absorbing isolation feet
- Elegant dust cover with adjustable hinges
- Handmade in Europe
Technical Specifications
| Speed | 33 and 45rpm (electronic speed change) |
|---|---|
| Principle | Belt-driven sub-platter |
| Speed variance | 0.7% (33rpm), 0.6% (45rpm) |
| Wow and Flutter | 0.25% (33rpm), 0.23% (45rpm) |
| Platter | Heavy 8mm-thick blasted-glass platter |
| Main bearing | Stainless steel axle in brass bushing |
| Signal to noise | 65dB |
| Tonearm | 8.6" one-piece aluminum |
| Effective arm length | 218.5mm |
| Overhang | 22.0mm |
| Effective tonearm mass | 8.0g |
| Counterweight for mass | 5-10g (pre-adjusted) |
| Tracking force range | 0-5g (set at 1.75g) |
| Included accessories | dust cover, felt mat, power supply, high-quality phono/line RCA cable |
| Power supply | 110-240V 50-60Hz 15V DC (800mA) |
| Power consumption | 4.5W max |
| Dimensions (WxHxD) | 415 x 100 x 335mm |
| Dimensions (standard) | 16.34 x 3.94 x 13.19" |
| Mass (weight) | 3.8kg (8.38 lbs) net |
| Dimensions | 33.5 x 41.5 x 10 cm |
