Easy To Use, All In One, Audiophile Turntable with built in Phono Preamp & Ortofon 2M Blue MM Cartridge!
Shinola partnered with VPI founder Harry Weisfield and son Mat, the premier American maker of turntables for almost 40 years. Shinola Audio is the result of over a year of close partnership between Shinola and some of the best American minds in audio. The Shinola Audio team, under the leadership of Alex Rosson, designed and engineered every detail with legendary American turntable maker VPI. Every component and element of the Shinola Runwell Turntable was carefully sourced from manufacturers across the globe, then built at the new Shinola Audio factory within their flagship Detroit store. Precision-machined aluminum components, like the main plate, platter, and tonearm were developed with and produced by MDI of Lakewood, NJ, a key VPI manufacturing partner.
The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.
"I wanted to make a turntable that could reproduce exactly what was on the record and not change it, make it sound just like the master tape. ...This is a real turntable." - Harry Weisfeld, VPI Founder
Specifications:
Wow and Flutter: < 0.1%
Gain: 35.4db @ 1KHz
RIAA Conformance Deviation: Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz
Input Overload: > 200mv at 1KHz
Input Impedance: 47kohm in parallel with 200pf
Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted: > 82db
Gain 1kHz MM: 35.4dB (jumpers open)
Gain 1kHz MC: 55.1dB (jumpers installed)
Termination impedance, MM gain resistive: 47kohm, via synthetic cooled termination
Equivalent temperature of 47kohm input termination, midband: < 20 degrees Kelvin
Termination impedance, capacitive: 200pF on board
Termination impedance, MC gain resistive: installed on input pads per cartridge requirements
EQ characteristic: RIAA standard
Infrasonic filter: Second-order maximally-flat, -3dBr at 13Hz
Line-level output resistance: 49.9 ohms, unmated
Overload margins: > 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z: 22Hz to 22kHz: 22uV rms, 100Hz to 22kHz: 12uV rms, 400Hz to 22kHz: 8.6uV rms
Output noise, MC gain, 10 ohm generator Z: 22Hz to 22kHz: < 220uV rms, 100Hz to 22kHz: < 120uV rms, 400Hz to 22kHz: < 86uV rms
Power consumption from mains input, preamp only enabled: < 8W
Distortion at noise-versus-distortion inflection point: < 0.001%
Dimensions: 18” x 13.875” x 7.5” (47.6cm x 35.2cm x 19cm)
Limited Lifetime Warranty!
Shinola partnered with VPI founder Harry Weisfield and son Mat, the premier American maker of turntables for almost 40 years. Shinola Audio is the result of over a year of close partnership between Shinola and some of the best American minds in audio. The Shinola Audio team, under the leadership of Alex Rosson, designed and engineered every detail with legendary American turntable maker VPI. Every component and element of the Shinola Runwell Turntable was carefully sourced from manufacturers across the globe, then built at the new Shinola Audio factory within their flagship Detroit store. Precision-machined aluminum components, like the main plate, platter, and tonearm were developed with and produced by MDI of Lakewood, NJ, a key VPI manufacturing partner.
The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.
"I wanted to make a turntable that could reproduce exactly what was on the record and not change it, make it sound just like the master tape. ...This is a real turntable." - Harry Weisfeld, VPI Founder
Specifications:
Wow and Flutter: < 0.1%
Gain: 35.4db @ 1KHz
RIAA Conformance Deviation: Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz
Input Overload: > 200mv at 1KHz
Input Impedance: 47kohm in parallel with 200pf
Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted: > 82db
Gain 1kHz MM: 35.4dB (jumpers open)
Gain 1kHz MC: 55.1dB (jumpers installed)
Termination impedance, MM gain resistive: 47kohm, via synthetic cooled termination
Equivalent temperature of 47kohm input termination, midband: < 20 degrees Kelvin
Termination impedance, capacitive: 200pF on board
Termination impedance, MC gain resistive: installed on input pads per cartridge requirements
EQ characteristic: RIAA standard
Infrasonic filter: Second-order maximally-flat, -3dBr at 13Hz
Line-level output resistance: 49.9 ohms, unmated
Overload margins: > 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z: 22Hz to 22kHz: 22uV rms, 100Hz to 22kHz: 12uV rms, 400Hz to 22kHz: 8.6uV rms
Output noise, MC gain, 10 ohm generator Z: 22Hz to 22kHz: < 220uV rms, 100Hz to 22kHz: < 120uV rms, 400Hz to 22kHz: < 86uV rms
Power consumption from mains input, preamp only enabled: < 8W
Distortion at noise-versus-distortion inflection point: < 0.001%
Dimensions: 18” x 13.875” x 7.5” (47.6cm x 35.2cm x 19cm)
Limited Lifetime Warranty!
