Plug-and-Play Turntable with Uncompromising Quality
SpinDeck offers music lovers of all backgrounds a high-grade belt-drive turntable that sets up in minutes. Featuring high-quality materials and precision-engineered parts, SpinDeck is the perfect vinyl-playing addition to SpinBase and other audio equipment.
- Made by Pro-Ject in Europe, Exclusively for Andover Audio
- Super-Simple Setup
- Pre-Set Tonearm and Counterweight
- Pre-Mounted Ortofon OM-5e Cartridge
- Includes Acrylic Lid
- Available in Black or White
All the Right Features
If you thought turntable setup was complicated, Spindeck proves otherwise. It offers the fastest setup process (literally minutes), as it comes pre-adjusted out of the box. No further set-up is required.
The turntable is available in black or white, to match your audio setup or Andover speaker system.
Pre-Set Aluminum Tonearm with an Ortofon OM-5e Cartridge
SpinDeck features a Ortofon OM5 custom cartridge, which is pre-mounted on the turntable's 8.6" aluminium saphire-bearing tonearm. The counterweight is also set and ready to go.
Get Your Spin On
Pair SpinDeck with your SpinBase, for the ultimate compact vinyl-listening setup. SpinDeck also works great with other audio systems.
|Principle||Belt-Drive with Silicone Belt|
|Speed||33, 45 rpm (manual speed change)|
|Speed Variance||33: 0.8%
|Wow & Flutter||33: 0.29%
|Special Turntable feet for Effective Decoupling|
|Low-Resonance MDF with Felt Mat||11.81 in (300 mm)|
|Main bearing||Stainless steel|
|Tonearm||Aluminum with Sapphire Bearings, 8.6 in (218.5 mm)|
|Overhang||0.86 in (22.0 mm)|
|Effective tonearm mass||8.0 g|
|Counterweight for mass||3 - 5.5g (pre-mounted)|
|Tracking force range||0 - 25mN (OM5 18mN pre-adjusted)|
Weight / Dimensions
|Dimensions||16.5" x 12.75" x 4.5" (dust cover on)|
|Motor & AC Power Supply||Low-Vibration, Synchronous|
|Power consumption||4.5 Watts max|
|Interconnect Cable||Pre-Mounted Gold-Plated RCA|
- Dust Cover
- 45 adapter
- Turntable Belt
- Power Supply
- Cartridge Alignment Tool
Is SpinDeck easy to setup?
Yes. It only takes a few minutes! Take SpinDeck out of the box. Place the platter on the spindle. Loop the belt around motor pulls and platter. Plug it in. You're ready to play!