A Revolution In Record Cleaning!
This product can only be shipped to U.S. addresses.
Improvements over the 2018 model include enhanced cleaning and drying with new high-performance Black Wipers, quick release of LP at the end of a drying cycle, and quieter drying thanks to new fans!
The Audio Desk Systeme Vinyl Cleaner Pro Record Cleaner is the new & improved version of the multi-award winning cleaner: Stereophile Product Of The Year, TAS Product Of The Year, Golden Ear & Editors' Choice Award Winner!
What makes the Audio Desk Systeme Vinyl Cleaner Pro Record Cleaner stand out from its contemporaries is its advanced ultrasonic cleaning cycle, which makes it the first and only of its kind. It doesn't stop there, though. The Vinyl Cleaner Pro also boasts a more traditional cleaning technique through bi-directional rotating microfiber cleaning drums. The ultrasonic cleaning coupled with the cleaning drums results in the most effective vinyl cleaner on the market. This form of cleaning is quieter, more convenient, and extremely gentle on LP surfaces.
Did we mention the process is fully automatic? Insert your LP vertically in the opening on top of the cleaner, push the red activation button, and in 5 minutes your LP will be comprehensively cleaned and dried. Yellow LED lights convey that the record is being cleaned while green LED lights signal that cleaning has completed. Once finished, the LP can be removed. It doesn't get any easier than this.
You'll be able to appreciate LPs on new levels as previously unheard details and air becomes revealed. Most surface noise gets eliminated as well. The sound will be closer to the music and your vinyl will sparkle as never before! During the cleaning process, counter-rotating microfiber cleaning barrels and ultrasonic waves softly remove even the finest contaminants from the grooves of the LP. While operating, the Vinyl Cleaner Pro fully filters the cleaning solution to avoid recontamination of the LP. Finally, two high performance fans guarantee effective yet quiet drying of your LP.
What makes ultrasonic cleaning so special? For starters, ultrasonic means sound generated above the human audible level. A physical effect called "cavitation" results from the generation of ultrasonic frequencies in a liquid. In this cavitation process, ultrasonic "compression waves" are created by an ultrasonic transducer. When the amplitude of this soundwave increases to a level where the surface tension of the liquid is broken, the fluid will tear apart leaving behind millions of microscopic vacuum bubbles. These vacuum bubbles then rapidly compress or implode creating millions of tiny liquid jets small enough to clean inside the smallest grooves of an LP. This process, also called "microagitation," displaces any contaminants on the surface of the LP.
Careful cleaning of records is monumental in preserving their value. Even when great care is taken, over time it becomes inevitable that they become dirty. Rainer Glass from Audio Desk Systeme has truly created a landmark record cleaner that follows its own path. You'll be able to cherish this cleaner for years to come.
The Audio Desk Systeme was the most effective, easy-to-use record-cleaning machine I've ever tried. I cleaned records that I'd already vacuum-cleaned but were still noisy, and the noise went away. Two examples: my original UK pressing of the Beatles' Let It Be and my most treasured classical album, an original pressing of Fritz Reiner and the Chicago Symphony's recording of Strauss's Also sprach Zarathustra (RCA Living Stereo LSC-1806). The latter looked clean when I bought it but was hopelessly noisy. Repeated cleanings over the decades since, using more sophisticated fluids and machines, have made it quieter but finally, after treatment with the Audio Desk, it's just about completely silent... I've never had so much fun cleaning LPs. I bought the review sample.
Even if you've cleaned your disc with some of the competing products on the market, you'll find that after the Audio Desk does its stuff you'll hear more deeply into the grooves. With a combination of brushes, rollers, and an exclusive ultrasonic cleaning technology, it cleans like no other LP scrubber. To top it off, the device cleans both sides at once.
I was beyond shocked when I performed a before-and-after test on the first LP I tried... The Audio Desk didn't just make the surfaces quieter as expected, but rendered a wholesale increase in clarity, the apparent separation of instrumental images in space, vividness, and dimensionality... The improvement was on the level of a component upgrade... I suspect that if you hear the Audio Desk's effects, you'll also find a way to own one.
(Not) a Matter of Philosophy
One can speak about two primary philosophies, two different approaches, that are used in disc cleaning (if you disregard the generally ineffective cleaning by hand): Surface Suction and Point Suction. Without wanting to go into the pros and cons of these two procedures, both have one common denominator - Suction: You may have heard the credo "the disc needs to undergo suction cleaning in order to become really clean", at various high-end trade fairs and in diverse analogue forums. This statement is underlined by the product offerings on the market: there appears little alternative to suction cleaning. In the case of disc cleaning the one thing all can agree on: when the dirt loosening process is not carried out effectively, then suction cleaning (or any other clever procedure) simply won't bring good results.
A Clean Machine
In order to loosen dirt, residues, and other contaminants from the disc surface, the standard approach employs brushes. The cleaning results are at least as various and diverse as the brush materials that are used. From the shape of the brush, to the pressure and angle applied, to the speed of turning, numerous criteria, which have to work optimally together, play an important role in order to form the basis for efficient disc cleaning. Unfortunately the worst case scenario occurs too often: instead of removing the dirt it is forced even deeper into the grooves, or spread across the entire disc surface, or worst of all, the analogue killer, the disc surface is damaged.
A Dust Remover
The Vinyl Cleaner Pro doesn't rely on brushes to remove dust and other contaminants. Counter-rotating microfibre wet cleaning barrels, and the ultrasonic process, remove dirt gently yet thoroughly; even the finest particles sitting deep in the grooves of the disc. The cleaning fluid is recirculated and filtered during the cleaning process - in this way the dirt removed, or shaken, from the disc can't find it's way directly or indirectly back onto the disc surface. Only then is the foundation for the important final step created: the drying process!
Drying With No Ifs, Ands, or Buts
Both surface and point suction rely on the vacuum created. The diminishing of the vacuum due to the aging of the apparatus, and the static charging of the disc caused by the effects of rubbing, are two main drawbacks of suction. Surface suction is generally characterized by the limited efficiency of dirt removal and loud vacuum cleaner-like noise. Point suction is typified by the slow speed of cleaning and complicated handling. Convenience is generally sacrificed in either case - both concepts in the main only allow one side of the disc to be cleaned at a time. Once again the Vinyl Cleaner Pro rips up the rule book! Both sides of the disc are cleaned and subsequently dried simultaneously. The gentle fan drying process is driven by two high-performance motors - with significantly lower noise, and with no creation of static!
Maximum Convenience
The Vinyl Cleaner Pro can justifiably claim to be the most user-friendly disc cleaner: operation, handling and care are all geared towards absolute simplicity and maximum convenience. Before first usage the Vinyl Cleaner Pro simply needs to be placed on a level surface, distilled water and cleaning fluid added, the wet filter be fitted and the apparatus plugged in - off you go!
Usage
Switch on the Vinyl Cleaner Pro, introduce a disc from above, press the start button - the cleaning and drying procedure run fully automatically, and you can get on with other jobs with no worries. The beginning and the end of the cleaning process are signaled both acoustically and by means of the LED display. Depending on the dirtiness of the particular disc the length of the main cleaning process can be individually set - simply at the touch of a button.
Easy To Care For
To begin with a quick word regarding cleaning fluid: In order to treat the vinyl as gently as possible, and create the best possible sound, the cleaning fluid, specifically developed for the Vinyl Cleaner Pro, avoids the use of alcohol, instead relying on a mild biodegradable mixture with excellent cleaning properties and outstanding antistatic characteristics. Just one container of cleaning fluid concentrate - 2 are included in the delivery package - is enough to clean approximately 100-200 discs (depending on the level of disc contamination). The wet filter is easy to clean: saturate with distilled water and ring out. The inspection interval for the wet filter is identical to the replacement of the cleaning fluid. The 4 microfibre-cleaning barrels are extremely robust and therefore only need to be replaced after approximately 500 completed cleaning operations.
Features
- Enhanced cleaning and drying including new high-performance Black Wipers
- All new quick release of LP at end of drying cycles
- Quieter running thanks to new fans
- Premium motor
- Pump with ceramic bearings
- Includes a dry-only option
- Safe low level ultrasonic to dislodge contaminants all the way to the bottom of the LP groove.
- Bi-directional surface cleaning using microfiber-covered barrels, which also manages fluid motion to wick contaminants away from the LP surface.
- Fluid filtration to remove contaminants.
- Filtered air drying to avoid the introduction of a dust-attracting static charge to the LP surface.
- One button full automation.
- Includes Two 20 ml Bottles of Audio Desk Systeme Record Cleaning Concentrate
Technical Specifications
Cleaning Time | 5 Minutes (Total Cleaning Time, including Drying Time: 6 Minutes) |
---|---|
Size | 13" W x 8" D x 10.7" H, (33cm W x 20cm D x 27cm H) |
Weight Without Liquid | 12 lbs. (5.5 kg) |
Cleaning Solution Capacity | 4.5 Liters (1.2gal) of Distilled Water Added to 20ml of Cleaning Concentrate |
Mains Adapter with Input Voltage | 110-240V, 50-60Hz |
Compatible Discs | 12" (300mm diameter) Only |
Manufacturer Warranty | 2 years |
Made in Germany
Replacement Parts
- Audio Desk Systeme Vinyl Cleaner Pro Record Cleaning Fluid 20ml: 20ml Record Cleaning Concentrate (mixed with 4.5 Liters of Distilled Water) cleans approximately 100-200 discs (depending on level of disc contamination)
- Audio Desk Systeme Vinyl Cleaner Pro Microfiber Barrels: Microfibre-Cleaning Barrels - replace after approximately 500 completed cleaning operations
- Audio Desk Systeme Vinyl Cleaner Pro Wet Filter: Wet Filter is easy to clean: saturate with distilled water and ring out. Clean after approximately 100-200 discs are cleaned.