Audio Technica AT-OC9XEN Dual Moving Coil Cartridge
Audio Technica AT-OC9XEN Dual Moving Coil Cartridge Audio Technica AT-OC9XEN Dual Moving Coil Cartridge Audio Technica AT-OC9XEN Dual Moving Coil Cartridge Audio Technica AT-OC9XEN Dual Moving Coil Cartridge

Share:

Audio Technica AT-OC9XEN Dual Moving Coil Cartridge

$348.99
 
 
 
Availability: Expected On 12-16-2019
In Stock An In Stock item is available to ship normally within 24 business hours.
Preorder A Preorder is an item that has not yet been released. Typically the label will set a projected release date (that is subject to change). If a projected release date is known, we will include this in the description in red. Other Preorders are set to release "TBA." This means that release date is yet "To Be Announced". The Preorder can be released anywhere between weeks, months or years from its initial announcement.
Out of Stock An Out Of Stock item is an item that we normally have available to ship but we are temporarily out of.
Awaiting Repress Awaiting repress titles are in the process of being repressed by the label. No ETA is available at this time.
Expected On When an item is Out Of Stock and we have an estimated date when our stock should arrive, we list that date on our website in the part's description.
Special Order A Special Order item is an item that we do not stock but can order from the manufacturer. Typical order times are located within the product description.
SKU:
AT-OC9XEN

The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features low mass nude elliptical stylus and aluminum cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Technical Specifications

Type Dual Moving Coil
Body Material Aluminum
Frequency Response 20-30,000 Hz
Channel Separation 25 dB (1 kHz)
Vertical Tracking Angle 20°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
Coil Impedance 12 ohms (1 kHz)
DC Resistance 12 ohms
Coil Inductance 25 mH (1 kHz)
Output 0.35 mV (at 1 kHz, 5 cm/sec)
Channel Balance 1.5 dB (1 kHz)
Stylus Shape Elliptical nude
Stylus Type Nude square shank
Stylus Curvature Radius 0.3 x 0.7 mil
Cantilever Aluminum pipe
Static Compliance 20 x 10-6 cm/dyne
Dynamic Compliance 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil PCOCC
Terminal Pins Brass
Mount Half-inch
Weight 7.6 g (0.3 oz)
Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Mounting Feature Threaded body

Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Description

The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features low mass nude elliptical stylus and aluminum cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Technical Specifications

Type Dual Moving Coil
Body Material Aluminum
Frequency Response 20-30,000 Hz
Channel Separation 25 dB (1 kHz)
Vertical Tracking Angle 20°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
Coil Impedance 12 ohms (1 kHz)
DC Resistance 12 ohms
Coil Inductance 25 mH (1 kHz)
Output 0.35 mV (at 1 kHz, 5 cm/sec)
Channel Balance 1.5 dB (1 kHz)
Stylus Shape Elliptical nude
Stylus Type Nude square shank
Stylus Curvature Radius 0.3 x 0.7 mil
Cantilever Aluminum pipe
Static Compliance 20 x 10-6 cm/dyne
Dynamic Compliance 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil PCOCC
Terminal Pins Brass
Mount Half-inch
Weight 7.6 g (0.3 oz)
Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Mounting Feature Threaded body

Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

ISBN
ASSOC
A
Genre
If Can Be Discounted
YES
Discontinued
NO
Inventory
.00
Construct
0
Dropship
0
Record Speed Record Size
Artist
Title
Composer
Additional Artists
Record Weight
Record Speed
Multi Channel
Stereo
Mono
Colored
Picture Disc
1/2 Speed
DMM
Out of Print
Sell Hold/Repressing
Direct to disc
Creation Date
Release Date
Availability
Expected On 12-16-2019
Scratch & Dent
0
EXPECT_ON
2019-12-16 00:00:00.000
back to top