The Excellent Battery Solution
The smart power 12V is a battery-based DC power supply upgrade designed for Clearaudio's concept series and Performance DC turntables. Like the smart power 24V, it provides clean power that is independent of the variability and inherent noise of the mains supply. With a minimal output impedance, it delivers a steady, stable voltage, allowing your concept or Performance DC turntable to maintain perfect speed stability. Again, like the 24V version, the smart power 12V can be set to switch automatically from battery play mode into recharging mode and will continue to enhance your turntable's performance and protect it from short circuits and power surges, even while charging. When used with the concept active turntable, the smart power's (12V) benefits are multiplied, since both the turntable's motor and the on-board phonostage are fed with pure, clean DC power.
|Battery||NiMh Battery 12V 500 0mAh|
|Power supply||100 - 240 V AC, 50 - 60 Hz, max. 1.4 A|
|Output||12 V DC, max. 1.6 A; fused (time delay fuse)|
|Power consumption in operation mode||6.5 - 33 watts (depending on the charge cycle)|
|Power consumption in off mode||0 watts (turned off at rear panel)|
|Weight||Approx. 2.2 kg|
|Dimensions (W/D/H in inches)||4.33 × 13.78 × 1.18|
|Dimensions (W/D/H in mm)||110 × 350 × 46|
|Warranty||2 years* (except batteries)
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.