Expressimo Audio The LIFT The LIFT (For Music Hall & Pro-Ject)
Expressimo Audio The LIFT The LIFT (For Music Hall & Pro-Ject)

Share:

Expressimo Audio The LIFT The LIFT (For Music Hall & Pro-Ject)

$99.99
 
 
 
Availability : information Backordered
IN STOCK
An In Stock item is available to ship normally within 24 business hours.

PREORDER
A Preorder is an item that has not yet been released. Typically the label will set a projected release date (that is subject to change). If a projected release date is known, we will include this in the description in red. Other Preorders are set to release “TBA.” This means that release date is yet “To Be Announced”. The Preorder can be released anywhere between weeks, months or years from its initial announcement.

OUT OF STOCK
An Out Of Stock item is an item that we normally have available to ship but we are temporarily out of.

EXPECTED ON
When an item is Out Of Stock and we have an estimated date when our stock should arrive, we list that date on our website in the part's description.

SPECIAL ORDER
A Special Order item is an item that we do not stock but can order from the manufacturer. Typical order times are located within the product description.
SKU:
EXPLIFTBMP
UPC:
EXPLIFTBMP
The LIFT will NOT work with the Music Hall MMF 2 Series Turntables or turntables with a platter thickness of less than 1 inch.

The last groove is NOT a good place for your stylus! The LIFT is a Must Have Accessory!
This lift is specially designed for Music Hall and Pro-Ject turntables!


This is a MUST HAVE! If you've ever gotten up out of the sweet spot, have fallen asleep, enjoy listening to music while eating, or just forget--this is the product for you. It will save your cartridge stylus. The last groove is NOT a good place for your stylus.

The difference between the original LIFT and the one used for the Pro-Ject and Music Hall turntables is that the foot stand has a smaller diameter and the back of the swing arm is lighter.

There is an important advantage to lifting the arm up at a record's end. It eliminates excessive vinyl build up on the sides of the stylus and this is why. A stylus riding that last groove more then twice is creating heat, (at the stylus point are tons of pressure producing this heat) thus melting the vinyl. Extra rotation, extra heat. Once this heavy build up occurs, it must be completely removed before the next play. A dirty stylus will damage the grooves therefore changing the sound. At least an hour should pass before playing the same record over again, this allows the vinyl to resume its shape.

In Stereophile Magazine's original review for The LIFT, Michael Fremer said: "Once properly adjusted it worked flawlessly and reliably, lifting the arm off the record gently and without surprises."

The Expressimo Audio Brass Tonearm LIFT is the solution to this problem. Machined from brass and polished to a gold luster, the LIFT easily installs between the tonearm and the platter on the plinth. As the tonearm hits the last lead groove of the record, it trips the LIFT which raises and suspends the tonearm in the air. With a stable, heavy circular base, the LIFT will mount on any table.

The LIFT is specifically designed the Music Hall and Pro-Ject Turntables.

Instructions:
Simply and Easy Set Up! The LIFT comes with a small allen wrench and small velcro strip. The LIFT is made for platters 1" to 1" 1/2 tall, but with a simple spacer you can put it on any platter. What you will need is a small piece of double sided tape to hold down the LIFT to the plinth.

The center point of the LIFT is just above (1/16" to 1/8") the top of the vinyl. You can adjust that by unloosening the set screw and moving the foot stand up or down. This will be how high it LIFTs your arm.

Please use your cartridge guard and an old record when setting up the LIFT. Some cartridges weigh 6 to 12 grams plus, so you will need to adjust the head weight of the LIFT accordingly.

Set the arm at the last groove and position the LIFT touching the arm. Once you determine final resting place for the LIFT, check to make sure it lifts correctly, place a piece of double sided tape underneath the LIFT base to adhere it to your plinth.
Description
The LIFT will NOT work with the Music Hall MMF 2 Series Turntables or turntables with a platter thickness of less than 1 inch.

The last groove is NOT a good place for your stylus! The LIFT is a Must Have Accessory!
This lift is specially designed for Music Hall and Pro-Ject turntables!


This is a MUST HAVE! If you've ever gotten up out of the sweet spot, have fallen asleep, enjoy listening to music while eating, or just forget--this is the product for you. It will save your cartridge stylus. The last groove is NOT a good place for your stylus.

The difference between the original LIFT and the one used for the Pro-Ject and Music Hall turntables is that the foot stand has a smaller diameter and the back of the swing arm is lighter.

There is an important advantage to lifting the arm up at a record's end. It eliminates excessive vinyl build up on the sides of the stylus and this is why. A stylus riding that last groove more then twice is creating heat, (at the stylus point are tons of pressure producing this heat) thus melting the vinyl. Extra rotation, extra heat. Once this heavy build up occurs, it must be completely removed before the next play. A dirty stylus will damage the grooves therefore changing the sound. At least an hour should pass before playing the same record over again, this allows the vinyl to resume its shape.

In Stereophile Magazine's original review for The LIFT, Michael Fremer said: "Once properly adjusted it worked flawlessly and reliably, lifting the arm off the record gently and without surprises."

The Expressimo Audio Brass Tonearm LIFT is the solution to this problem. Machined from brass and polished to a gold luster, the LIFT easily installs between the tonearm and the platter on the plinth. As the tonearm hits the last lead groove of the record, it trips the LIFT which raises and suspends the tonearm in the air. With a stable, heavy circular base, the LIFT will mount on any table.

The LIFT is specifically designed the Music Hall and Pro-Ject Turntables.

Instructions:
Simply and Easy Set Up! The LIFT comes with a small allen wrench and small velcro strip. The LIFT is made for platters 1" to 1" 1/2 tall, but with a simple spacer you can put it on any platter. What you will need is a small piece of double sided tape to hold down the LIFT to the plinth.

The center point of the LIFT is just above (1/16" to 1/8") the top of the vinyl. You can adjust that by unloosening the set screw and moving the foot stand up or down. This will be how high it LIFTs your arm.

Please use your cartridge guard and an old record when setting up the LIFT. Some cartridges weigh 6 to 12 grams plus, so you will need to adjust the head weight of the LIFT accordingly.

Set the arm at the last groove and position the LIFT touching the arm. Once you determine final resting place for the LIFT, check to make sure it lifts correctly, place a piece of double sided tape underneath the LIFT base to adhere it to your plinth.
If Can Be Discounted
YES
Discontinued
NO
Inventory
.00
Construct
0
Dropship
0
Artist
Title
Composer
Additional Artists
Record Weight
Record Speed
Record Speed Record Size
Multi Channel
Stereo
Mono
Colored
Picture Disc
1/2 Speed
DMM
Out of Print
Sell Hold/Repressing
Direct to disc
Creation Date
06-09-2015
Availability
Backordered
ISBN
Genre
Release Date
ASSOC
A
Scratch & Dent
0
back to top