The TN-400BT-X is an analog turntable that also enables you to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tonearm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input.
A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables you to playback LP records with high-quality audio and low latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive.
For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.
A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat belt, giving immensely stable playback at 33-1/3, 45 and 78 rpm speeds.
A precisely machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.
The TN-400BT-X is available in natural varnished walnut veneer finish with laser-engraved TEAC logo.
The TN-400BT-X has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion.
The S-shaped, static-balanced aluminum tonearm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tonearm lifter is also fitted for smooth lowering of the tonearm onto records.
The tonearm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tonearm and the headshell, gold-plated contact points are employed, to help deliver an uncorrupted audio signal.
The TN-400BT-X's Bluetooth® wireless transmission system supports the higher quality Qualcomm® aptX™ Adaptive codecs, as well as the conventional SBC codec. This means that even if users don't have a hi-fi system, they can still enjoy truly high-quality vinyl replay via Bluetooth®-equipped headphones or speakers. Connecting the TN-400BT-X to Bluetooth® headphones or speakers is achieved very simply, at the touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of the connection status.
The TN-400BT-X brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback.
The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback.
Features
- Robust High-Density MDF Plinth Provides Both Vibration Isolation and Elegance
- Available in a Selection of Contemporary Matte Finishes, or a Natural Walnut Veneer
- 3-Speed Belt-Drive Mechanism with Aluminum Die-Cast Platter (33-1/3, 45, 78 rpm)
- Low-Resistance Spindle for Stable Rotational Speed
- Static-Balanced S-Shaped Tonearm with Universal-Type Headshell
- Pre-Installed MM-Type AT95E Cartridge from Audio-Technica
- Built-In Phono EQ Amplifier
- High-Quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive Wireless Audio Transmission
- Floating Construction Using Decoupled Feet Provides High Feedback Resistance
- Machined Aluminum Operation Knobs and Feet
- Gold-Plated RCA Jacks (For Line/Phono Output) and Tonearm Contacts
- GND Terminal on Rear Panel
- RCA Audio Cable with GND Wiring Included
- Weight: 11 lbs
- Dimensions: 16.5"x4.1"x14"
