The VPI Player is an all in one high-end entry level turntable!
The VPI Player Turntable comes complete with a phonostage, pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. It is the perfect solution to enjoying your records! It also has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers. The VPI Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for!
1.25" thick textured vinyl covered non-resonant MDF chassis.
16" x 11" footprint
19" x 14" x 6" overall size
Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacobs Taper for a concentric rigidly mounted coupling.
The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.
9 vertical Yoke type tonearm with lateral turntable type bearing.
Pivot to spindle: 223mm
Effective length: 240.7mm
Offset angle: 22.85 degrees
Average RMS distortion: .36%
VTA adjustable arm mount.
Damped stainless steel armtube.
Very pure copper wire, twisted with special insulating jacket.
The armbase is upgradeable to a standard JMW 9 arm.
Type: Belt drive (manual turntable)
Motor: 24v synchronous AC motor
Turntable Platter: Aluminum
Diameter: 11.81" (30.0 cm)
Turntable Speeds: 33 1/33 RPM and 45 RPM
Wow and Flutter: 0.06% WOW (in accordance with DIN specification), 0.04% Flutter in accordance with DIN specification)
Rumble: < - 80dB (IEC 98A unweighted)
Cartridge: Ortofon 2M Red
Output: 5 mV @ 1 KHz
Tracking Force: 1.5 grams (recommended)
Input Load: 47K
Weight: 5.5 grams
Power Supply: 110v VAC @ 60 Hz, 230v VAC @ 50hz
Power Consumption: 7.7 watts at full output
Dimensions: 18.5" (470 mm) W x 13.5" (343 mm) D x 4.3" (109 mm) H
Weight: 12.9 lbs. (5.9 kg)
Click Here to view or download the VPI Player Turntable Manual!