The AT-OC9XEB Dual Moving Coil cartridge with bonded elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the bonded elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
Trade In Pricing
If you purchase this cartridge with a trade-in, please note when you check out your total will show the normal sale price of this item and NOT the trade in price. However, when we process your order, you will be charged ONLY the trade in price. When you have received your new Audio Technica cartridge, please carefully pack and ship your trade-in cartridge to us (see our website for address).
| Retip/Exchange | $181.25 |
|---|---|
| Other Trade-in Pricing Available | Call |
Features
- Dual moving coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
- The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
- The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
- Features a bonded elliptical stylus and aluminum cantilever
- A neodymium magnet and pure iron yoke provide increased magnetic energy
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
- Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Technical Specifications
| Type | Dual Moving Coil |
|---|---|
| Body Material | Aluminum |
| Frequency Response | 20-30,000 Hz |
| Channel Separation | 25 dB (1 kHz) |
| Vertical Tracking Angle | 20° |
| Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
| Recommended Load Impedance | Min. 100 ohms (when head amplifier is connected) |
| Coil Impedance | 12 ohms (1 kHz) |
| DC Resistance | 12 ohms |
| Coil Inductance | 25 mH (1 kHz) |
| Output | 0.32 mV (at 1 kHz, 5 cm/sec) |
| Channel Balance | 1.5 dB (1 kHz) |
| Stylus Shape | Elliptical bonded |
| Stylus Type | Bonded round shank |
| Stylus Curvature Radius | 0.3 x 0.7 mil |
| Cantilever | Aluminum pipe |
| Static Compliance | 20 x 10-6 cm/dyne |
| Dynamic Compliance | 9 x 10-6 cm/dyne (100 Hz) |
| Wire Used for Coil | PCOCC |
| Terminal Pins | Brass |
| Mount | Half-inch |
| Weight | 7.6 g (0.3 oz) |
| Dimensions | 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D |
| Accessories Included | Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush |
| Mounting Feature | Threaded body |
Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.
