Audioquest Conductive LP Cleaner Carbon Fiber Record Brush
Audioquest Conductive LP Cleaner Carbon Fiber Record Brush Audioquest Conductive LP Cleaner Carbon Fiber Record Brush Audioquest Conductive LP Cleaner Carbon Fiber Record Brush Audioquest Conductive LP Cleaner Carbon Fiber Record Brush Audioquest Conductive LP Cleaner Carbon Fiber Record Brush

Share:

Audioquest Conductive LP Cleaner Carbon Fiber Record Brush

$22.95
 
 
 
Availability: In Stock
In Stock An In Stock item is available to ship normally within 24 business hours.
Preorder A Preorder is an item that has not yet been released. Typically the label will set a projected release date (that is subject to change). If a projected release date is known, we will include this in the description in red. Other Preorders are set to release "TBA." This means that release date is yet "To Be Announced". The Preorder can be released anywhere between weeks, months or years from its initial announcement.
Out of Stock An Out Of Stock item is an item that we normally have available to ship but we are temporarily out of.
Awaiting Repress Awaiting repress titles are in the process of being repressed by the label. No ETA is available at this time.
Expected On When an item is Out Of Stock and we have an estimated date when our stock should arrive, we list that date on our website in the part's description.
Special Order A Special Order item is an item that we do not stock but can order from the manufacturer. Typical order times are located within the product description.
SKU:
AQ-RBRUSHLP
UPC:
092592050488


"Throw Away Your Old AudioQuest Carbon Fiber Brush!" - Michael Fremer, analogplanet.com

Eliminates static & removes microscopic dust before it becomes embedded in the vinyl... Keep your records sounding like new!

A great little product no turntable owner should be without! Made with carbon fiber bristles, the Audioquest record brush uses conductive carbon fibers to eliminate static electricity while removing dust and fine particles that can degrade your record's sound.

Contains 624,000 highly conductive carbon fibers in two rows for effective record cleaning. Works on LCD screens & keyboards, too!

The Audioquest Carbon Fiber Record Brush gently reaches into the groove, pulling out dust and dirt that would otherwise snap, crackle, and pop through your speakers. Don’t let those little intrusions turn into big interruptions.

"Throw Away Your Old AudioQuest Carbon Fiber Brush! AudioQuest's carbon fiber brush, in production for thirty five years, has been the industry "standard" dry record brush. If you have the one pictured above [the old grey handled version], please throw it out or donate it to a really needy record collector. You should replace it with AudioQuest's new carbon fiber brush..."

"...Why? Company founder Bill Low eventually realized that the original brush, along with most others, doesn't provide a good electrical path between the fibers and the handle, which is the static electricity "ground" discharge point to your hand. We are the world. You are the ground. The original brush's handle has a print-protecting coating that inhibits the static-electricity's path to ground. So AQ went back to the proverbial drawing board and re-designed the brush, which required new tooling for every part. The new brush has what the company calls "ideal conductivity" from the carbon fibers, through the brush's internal parts to the conductive gold contacts placed close to your fingers, which is where they need to be." - Michael Fremer, analogplanet.com

"You're going to buy one; I'm going to buy one; anyone who listens to vinyl is gonna buy one. And if Bill Low [William E. Low Owner/AudioQuest] says it's improved, so much the better. Not just highly recommended - the thing is indispensable." - Jonathan Valin, The Absolute Sound, July/August 2017

"The thing is indispensable. Accessory of the Year? Are you kidding? Accessory of the Decade is more like it." - The Absolute Sound 2017 Product of the Year Award Winner, January 2018

Features:
• Safe, fast, and effective tool for removing dust and debris from vinyl records
• Conductive carbon fiber bristles and conductive gold contacts remove microscopic dust before it becomes embedded in the vinyl
• Keeps records sounding like new
• Also perfect for computer keyboards and much more

Instructions:
1. Place record on platter and start turntable.
2. Holding the Brush's gold contacts, gently place the carbon fibers across the grooves. The fibers must touch the grooves, but should not bend - it is the ends of the fibers which do the cleaning.
3. Let the record turn a few times in order for the carbon fibers to gather both the visible dust, and the micro-dust that is too small to see.
4. With the brush still on the record, rotate your wrist and the brush counterclockwise, lifting the fibers off the record. Try not to lose the dust as you lift the brush off the record.
5. Rotate the brush within the black handle to clean the dust off the fibers.
6. The brush is better at gathering dust than at holding dust - so repeat steps 3 and 4 a second or third time. For records that are cleaned every time they are played, and not left out, a single pass with the Record Brush will keep them clean.

NOTE: Do not touch the carbon fibers as fingers' natural oil will compromise the cleaning process.
Description


"Throw Away Your Old AudioQuest Carbon Fiber Brush!" - Michael Fremer, analogplanet.com

Eliminates static & removes microscopic dust before it becomes embedded in the vinyl... Keep your records sounding like new!

A great little product no turntable owner should be without! Made with carbon fiber bristles, the Audioquest record brush uses conductive carbon fibers to eliminate static electricity while removing dust and fine particles that can degrade your record's sound.

Contains 624,000 highly conductive carbon fibers in two rows for effective record cleaning. Works on LCD screens & keyboards, too!

The Audioquest Carbon Fiber Record Brush gently reaches into the groove, pulling out dust and dirt that would otherwise snap, crackle, and pop through your speakers. Don’t let those little intrusions turn into big interruptions.

"Throw Away Your Old AudioQuest Carbon Fiber Brush! AudioQuest's carbon fiber brush, in production for thirty five years, has been the industry "standard" dry record brush. If you have the one pictured above [the old grey handled version], please throw it out or donate it to a really needy record collector. You should replace it with AudioQuest's new carbon fiber brush..."

"...Why? Company founder Bill Low eventually realized that the original brush, along with most others, doesn't provide a good electrical path between the fibers and the handle, which is the static electricity "ground" discharge point to your hand. We are the world. You are the ground. The original brush's handle has a print-protecting coating that inhibits the static-electricity's path to ground. So AQ went back to the proverbial drawing board and re-designed the brush, which required new tooling for every part. The new brush has what the company calls "ideal conductivity" from the carbon fibers, through the brush's internal parts to the conductive gold contacts placed close to your fingers, which is where they need to be." - Michael Fremer, analogplanet.com

"You're going to buy one; I'm going to buy one; anyone who listens to vinyl is gonna buy one. And if Bill Low [William E. Low Owner/AudioQuest] says it's improved, so much the better. Not just highly recommended - the thing is indispensable." - Jonathan Valin, The Absolute Sound, July/August 2017

"The thing is indispensable. Accessory of the Year? Are you kidding? Accessory of the Decade is more like it." - The Absolute Sound 2017 Product of the Year Award Winner, January 2018

Features:
• Safe, fast, and effective tool for removing dust and debris from vinyl records
• Conductive carbon fiber bristles and conductive gold contacts remove microscopic dust before it becomes embedded in the vinyl
• Keeps records sounding like new
• Also perfect for computer keyboards and much more

Instructions:
1. Place record on platter and start turntable.
2. Holding the Brush's gold contacts, gently place the carbon fibers across the grooves. The fibers must touch the grooves, but should not bend - it is the ends of the fibers which do the cleaning.
3. Let the record turn a few times in order for the carbon fibers to gather both the visible dust, and the micro-dust that is too small to see.
4. With the brush still on the record, rotate your wrist and the brush counterclockwise, lifting the fibers off the record. Try not to lose the dust as you lift the brush off the record.
5. Rotate the brush within the black handle to clean the dust off the fibers.
6. The brush is better at gathering dust than at holding dust - so repeat steps 3 and 4 a second or third time. For records that are cleaned every time they are played, and not left out, a single pass with the Record Brush will keep them clean.

NOTE: Do not touch the carbon fibers as fingers' natural oil will compromise the cleaning process.
If Can Be Discounted
YES
Discontinued
NO
Inventory
39.00
Construct
0
Dropship
0
Artist
Title
Composer
Additional Artists
Record Weight
Record Speed
Record Speed Record Size
Multi Channel
Stereo
Mono
Colored
Picture Disc
1/2 Speed
DMM
Out of Print
Sell Hold/Repressing
Direct to disc
Creation Date
10-19-2016
Availability
In Stock
ISBN
Genre
Release Date
ASSOC
A
Scratch & Dent
0
back to top