Limited Edition 80th Anniversary SRM-353X Black Headphone Amp! While Supplies Last!!!
This item not eligible for any further discount offers!
SPECIAL NOTE: Specifications: 120V, U.S. Version, 1 Year Parts & Labor Warranty. NOTE: All units available on Japanese websites are the 100volt for Japan only models. They have no warranty in the USA, are a potential fire hazard and will have significantly shortened lives due to the 20% over voltage by USA 120V power!!!
The STAX SRM-353XBK Black Headphone Amp is made from carefully selected high-quality parts resulting in wide frequency response, natural tonal quality and extended dynamic range at high frequencies! Carefully selected high-quality parts of an audio grade further improve the tone quality, and re-examination of circuit details realized much wider frequency response. XLR input terminal provided to connect to the balanced output of audio equipment taking advantage of tis superior performance.
Features:
• All-stage direct-coupling class-A DC amplifier configuration with no coupling-capacitor and with original low noise dual FET for the first stage. Natural tone quality with much amount of sound information has been realized.
• Brushed-up emitter follower has been adopted for the output stage. The wide range design realized the expansion of dynamic range at high frequency and further improvement of sound quality.
• In addition to RCA input, XLR balanced input is provided. The connection possibility to other equipments has been widened.
• Custom-made 2-axis 4-gang volume controller is employed.
• STAX traditional extravagant non-magnetic aluminum alloy chassis was adopted.
• Only carefully selected parts with little aging are used in consideration of tone quality and performance.
• The gold nameplate is equipped as the proof of the 80th anniversary Limited model of STAX.
• High-grade "HiFC" RCA interconnect cable is attached.
Specifications:
Frequency Response: DC-90kHz (when used with one SR-L series Earspeaker)
Rated Input Level: 100mV (at 100V output)
Gain: 60dB
Harmonic Distortion: 0.01% or less (with one SR-L500 at 100Vr.m.s. / 1kHz output)
Input Impedance: 50kOhm (RCA) / 50kOhm x 2 (XLR)
Input Terminal: RCA x 1 or XLR x 1 (alternative)
Maximum Output Voltage: 400Vr.m.s. / 1kHz
Standard Bias Voltage: DC580V
Mains Voltage: Different depending on the area.
Power Consumption: 30W
Operating Temperature/Humidity: 0 To 35 Degrees C / Less Than 90% (Non-Condensing)
Dimensions: 150W x 100H x 360D mm (protruding portion included)
Weight: 3.0kg
Others: Input-Bypassing Parallel Output (RCA)
1 Year Parts and Labor Warranty.
This item not eligible for any further discount offers!
SPECIAL NOTE: Specifications: 120V, U.S. Version, 1 Year Parts & Labor Warranty. NOTE: All units available on Japanese websites are the 100volt for Japan only models. They have no warranty in the USA, are a potential fire hazard and will have significantly shortened lives due to the 20% over voltage by USA 120V power!!!
The STAX SRM-353XBK Black Headphone Amp is made from carefully selected high-quality parts resulting in wide frequency response, natural tonal quality and extended dynamic range at high frequencies! Carefully selected high-quality parts of an audio grade further improve the tone quality, and re-examination of circuit details realized much wider frequency response. XLR input terminal provided to connect to the balanced output of audio equipment taking advantage of tis superior performance.
Features:
• All-stage direct-coupling class-A DC amplifier configuration with no coupling-capacitor and with original low noise dual FET for the first stage. Natural tone quality with much amount of sound information has been realized.
• Brushed-up emitter follower has been adopted for the output stage. The wide range design realized the expansion of dynamic range at high frequency and further improvement of sound quality.
• In addition to RCA input, XLR balanced input is provided. The connection possibility to other equipments has been widened.
• Custom-made 2-axis 4-gang volume controller is employed.
• STAX traditional extravagant non-magnetic aluminum alloy chassis was adopted.
• Only carefully selected parts with little aging are used in consideration of tone quality and performance.
• The gold nameplate is equipped as the proof of the 80th anniversary Limited model of STAX.
• High-grade "HiFC" RCA interconnect cable is attached.
Specifications:
Frequency Response: DC-90kHz (when used with one SR-L series Earspeaker)
Rated Input Level: 100mV (at 100V output)
Gain: 60dB
Harmonic Distortion: 0.01% or less (with one SR-L500 at 100Vr.m.s. / 1kHz output)
Input Impedance: 50kOhm (RCA) / 50kOhm x 2 (XLR)
Input Terminal: RCA x 1 or XLR x 1 (alternative)
Maximum Output Voltage: 400Vr.m.s. / 1kHz
Standard Bias Voltage: DC580V
Mains Voltage: Different depending on the area.
Power Consumption: 30W
Operating Temperature/Humidity: 0 To 35 Degrees C / Less Than 90% (Non-Condensing)
Dimensions: 150W x 100H x 360D mm (protruding portion included)
Weight: 3.0kg
Others: Input-Bypassing Parallel Output (RCA)
1 Year Parts and Labor Warranty.
