VPI Prime Turntable & JMW-10 3D Tonearm (Black)
VPI Prime Turntable & JMW-10 3D Tonearm (Black) VPI Prime Turntable & JMW-10 3D Tonearm (Black) VPI Prime Turntable & JMW-10 3D Tonearm (Black) VPI Prime Turntable & JMW-10 3D Tonearm (Black)
: VPI

Share:

VPI Prime Turntable & JMW-10 3D Tonearm (Black)

$3,999.99 $4,249.99
(You save $250.00)
 
 
 
Availability: In Stock
In Stock An In Stock item is available to ship normally within 24 business hours.
Preorder A Preorder is an item that has not yet been released. Typically the label will set a projected release date (that is subject to change). If a projected release date is known, we will include this in the description in red. Other Preorders are set to release "TBA." This means that release date is yet "To Be Announced". The Preorder can be released anywhere between weeks, months or years from its initial announcement.
Backordered An Out Of Stock item is an item that we normally have available to ship but we are temporarily out of.
Awaiting Repress Awaiting repress titles are in the process of being repressed by the label. No ETA is available at this time.
Expected On When an item is Out Of Stock and we have an estimated date when our stock should arrive, we list that date on our website in the part's description.
Special Order A Special Order item is an item that we do not stock but can order from the manufacturer. Typical order times are located within the product description.
SKU:
VPI-TTPRIME
UPC:
VPI-TTPRIME

This product can only be shipped to U.S. addresses.

On sale, save almost 6% during September 2020!

A cartridge is not included with this turntable, but you can add any cartridge we sell! Call us today!
All cartridges available professionally installed and adjusted! Click Here for available cartridges!

Prime Turntable

For the past 3 years, VPI has focused mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime, VPI wanted to get back to their roots and focus on the existing audience with a table that offers quality hi-end sound at an affordable price.

Prime Turntable Features

  • 3D Printed JMW-10 Tonearm.
  • ​Custom Isolation Feet​.
  • ​VTA Base on the Fly.
  • ​Easy cartridge alignment.
  • ​Interchangeable tonearms.
  • ​Made in the USA.

Prime Turntable Technical Specifications

Chassis Composition Vinyl Wrapped MDF and Steel
Platter Type & Size 12" Aluminum, 20-Lbs
Tonearm Included JMW-10-3D Tonearm
Motor RPM 300 RPM
Motor Pulley Accuracy +/- .0005"
Wow and Flutter .05%
Speed Accuracy .05%
Rumble 80 db Down.
Footprint 19 ½" x 13 ¾"
Overall Size 21 ⅜" x 15 ¾"
Total Weight 44-Lbs

JMW-10-3D-Reference Wire Tonearm

The original award winning VPI Unipivot design, with the cutting edge technology of 3D printing. The material is a proprietary epoxy resin which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.

The JMW 3D tonearm's most immediately obvious sonic characteristic was a smooth, non-resonant, exceptionally well-balanced tonal quality that makes it almost seem to disappear.
-Michael Fremer

Unipivot, low friction design with adjustable side weights and drop counter weight for a low center of gravity. Lemo connection for easy swapping between arm wands.

JMW-10-3D-Reference Wire Technical Specifications

Pivot to spindle 258 - mm
Effective length 273.4 - mm
Effective mass 9.0 - g
Overhang 15.4 - mm
Offset angle 19.98 - degrees
Average RMS distortion 0.311%
Description

This product can only be shipped to U.S. addresses.

On sale, save almost 6% during September 2020!

A cartridge is not included with this turntable, but you can add any cartridge we sell! Call us today!
All cartridges available professionally installed and adjusted! Click Here for available cartridges!

Prime Turntable

For the past 3 years, VPI has focused mainly on new/entry level audiophiles and getting them to embrace vinyl for the first time. With the Prime, VPI wanted to get back to their roots and focus on the existing audience with a table that offers quality hi-end sound at an affordable price.

Prime Turntable Features

  • 3D Printed JMW-10 Tonearm.
  • ​Custom Isolation Feet​.
  • ​VTA Base on the Fly.
  • ​Easy cartridge alignment.
  • ​Interchangeable tonearms.
  • ​Made in the USA.

Prime Turntable Technical Specifications

Chassis Composition Vinyl Wrapped MDF and Steel
Platter Type & Size 12" Aluminum, 20-Lbs
Tonearm Included JMW-10-3D Tonearm
Motor RPM 300 RPM
Motor Pulley Accuracy +/- .0005"
Wow and Flutter .05%
Speed Accuracy .05%
Rumble 80 db Down.
Footprint 19 ½" x 13 ¾"
Overall Size 21 ⅜" x 15 ¾"
Total Weight 44-Lbs

JMW-10-3D-Reference Wire Tonearm

The original award winning VPI Unipivot design, with the cutting edge technology of 3D printing. The material is a proprietary epoxy resin which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it's the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.

The JMW 3D tonearm's most immediately obvious sonic characteristic was a smooth, non-resonant, exceptionally well-balanced tonal quality that makes it almost seem to disappear.
-Michael Fremer

Unipivot, low friction design with adjustable side weights and drop counter weight for a low center of gravity. Lemo connection for easy swapping between arm wands.

JMW-10-3D-Reference Wire Technical Specifications

Pivot to spindle 258 - mm
Effective length 273.4 - mm
Effective mass 9.0 - g
Overhang 15.4 - mm
Offset angle 19.98 - degrees
Average RMS distortion 0.311%
If Can Be Discounted
YES
Discontinued
NO
Inventory
1.00
Construct
0
Dropship
0
Artist
Title
Composer
Additional Artists
Record Weight
Record Speed
Record Speed Record Size
Multi Channel
Stereo
Mono
Colored
Picture Disc
1/2 Speed
DMM
Out of Print
Sell Hold/Repressing
Direct to disc
Availability
In Stock
ISBN
Genre
Creation Date
Release Date
ASSOC
A
Scratch & Dent
0
back to top