Certified Factory Rebuilt! Fully Tested & Inspected by Peter Ledermann, President/Chief Engineer at Soundsmith!
Hurry, Only 1 Available. Won't Last Long!
1 year warranty included! Satisfaction Guaranteed!
Built upon a solid Aluminum base, the Glider moving coil cantilever assembly is free of body resonances and sports an open, free-floating (nude) design. The Glider offers better definition and transparency from a lower moving mass coil with increased dynamics stemming from a refined rear pole piece/damper design. A higher output level is generated by increased magnet strength and size. Enhanced tracking results from aerospace suspension technology with improved imaging resulting from a locking azimuth/suspension mechanism.
Extremely Neutral Frequency Response
Excellent Separation Between Instruments
Tight Deep Bass
Stylus: CL Stylus
Vertical Tracking Angle (VTA): 20-22 degrees
Coil: Pure iron cross coil
Weight: 6.6 grams
Output Voltage: 0.9mV at 3.54 cm/s
Internal Impedance: 41 ohms
Frequency Response: 20-20,000 Hz +/- 1 dB
Channel Balance: Better Than 0.5dB
Channel Separation: Better Than 35 dB at 1 kHz
Tracking Ability at 315 Hz at a Tracking Force of 2 grams: 80 um
Dynamic Compliance: 15 um/mN
Set Up Instructions:
Recommended Loading: 1000-47,000 ohms
Recommended Tracking Force: 1.7-2.2 grams
Optimum Tracking Force: 1.8-2.0 grams
Recommended Tonearm Mass: Medium
Optimum Working Temperature: 23 Degrees Celsius