STAX Authorized Web Dealer!
SPECIAL NOTE: Specifications: 120V, U.S. Version, 1 Year Year Parts & Labor Warranty. NOTE: All units available on Japanese websites are the 100volt for Japan only models. They have no warranty in the USA, are a potential fire hazard and will have significantly shortened lives due to the 20% over voltage by USA 120V power!!!
The new STAX SR-007 II and SRM-727II Combo provide deep powerful sound with a constantly stable output voltage, ensuring compatibility with all new audio formats including DVD Audio and SACD!
Headphones:
Powerful Sound with Utmost Delicacy
The rationale is the development of the new SR-007 II Earspeaker was to provide deep powerful sound previously unobtainable in Earspeakers. STAX engineers developed a unique new electrode structure. Visible through the outer case, gold plated on the outer edge this new electrode has less holes than conventional STAX Earspeakers and thus provides an increases diaphragm vibration area allowing for rich and powerful sound yet retaining all the delicacy STAX is famous for.
Rigid Metal Housing
To maintain clear distortion free sound it is most important that nothing other than the diaphragm should vibrate. Within the STAX SR-007 II the sound element is encased in a thick insulated resin case firmly fixed to the rigid body. The results are nothing short of spectacular.
Fully Adjustable Earpads
Utmost comfort for maximum enjoyment of your STAX SR-007 II is provided with earpads that are fully adjustable to the shape of your head.
Deluxe Carrying Case
The 007 Omega II Headphones include a deluxe ATA Style Padded Flight Case with Gold STAX faceplate. This rigid case provides the ultimate in protection for your 007's no matter what the environment!
SR-007 II Specifications:
Type: Push-Pull Electrostatic Earspeaker
Frequency Response: 6 - 41,000Hz
Impedance: 170k Ohms (10kHz)
Sensitivity: 100dB / 100V r.m.s. 1 kHz
Bias Voltage: 580V DC
Left & Right Channel Identification: Left (L) and Right (R) indicators are provided at the cable entrance points on the Earspeakers. Left channel cable is marked with a solid Line. Right channel is marked with a dotted Line.
Ear Pads: Crafted from high quality artificial leather for durability and comfort.
Cable: Low capacity wide format, PC-OCC (Pure Crystal Ohno Continuous Casting) 2.5m/8.2ft
Ambient Temperature & Humidity: 0 to 35ºC / 90% max. without condensation
Weight: 12.9oz without cable / 1.1lbs with cables
Recommended Driver: STAX SRM-727II
1 Year Parts and Labor Warranty.
Headphone Amp:
Class A, Non-Feedback (Non-NFB)
The SRM-727II features non-feedback (NON-NFB) output stage for the first time ever in STAX drivers. Large current emitter follower Class A amplification circuit. This makes it possible to achieve a much more vivid and dynamic sound quality with frequency response raised to 115kHz. (from 100kHz)
New Design
A newly designed front panel with rounded corners in brushed finish. Available in Silver or Black
Pure Balanced System
The electrostatic method is a playback method which involves the installation of drive electrodes on either side of a high-polymer film diaphragm with a thickness of only a few microns into each of which a plus signal and a minus signal are fed. This means that XLR connection with a pure balance output CD player makes it possible to listen to the original sound permitted by the balance system without a conversion circuit.
High Quality Parts, High Quality Sound
Careful selection of parts with high consideration on sound quality, performance, and the environment. Low noise FET is used at the input stage with a simple two-stage amplifying circuit. A natural and pure sound quality with high information quantity.
Bypass Connection
SRM-727II provides a bypass mode that enables "direct" connection to preamplifiers, passive volume controls or integrated amplifiers and receivers with Pre-out. A direct switch that avoids duplication of volume control.
SRM-727II Specifications:
Type: All-stage semiconductors Low noise dual FET input NON-NFB Class A operation, Pure balance DC amplifier configuration Earspeaker driver unit
Frequency Response: DC to 115,000Hz w/ either SR-007 or SR-404
High Frequency Distortion: Max. 0.01% (with 100 to 10kHz, 100V r.m.s. output)
Gain: 54dB (x500)
Input Terminal: RCA or XLR with 1 RCA parallel out
Rated Input Level: 200mV (with 100V output)
Input Impedance: 50Kohm (RCA), 50kohm x2(XLR)
Max. Output Voltage: 450V r.m.s. (1kHz)
Standard Bias Voltage: PRO 580V x 2
Operating Power Voltage Frequency: 117V (50Hz / 60Hz)
Power Consumption: 46W
Ambient Temperature & Humidity: 0 to 35ºC / 90% max. without condensation
External Dimensions: 7.7 (W) x 4.1 (H) x 16.5 (D) in
Weight: 11.5lbs
Color: Silver
XLR terminal polarity: No. 1: Sealed; No. 2: Hot; No. 3: Cold
SPECIAL NOTE: The STAX SR-007 Headphones are also available in Silver, but NOT in the USA. These are only available in Japan. [SR-007A]. The only difference in the SR-007A and the SR-007 Omega II Mk2 Open Back Headphones is the color.
1 Year Parts and Labor Warranty.