The first SR-Lambda series was introduced 36 years ago and it has further developed into a new-generation SR-Lambda with its newly designed enclosure - the new SR-L700 advanced-Lambda series Earspeaker.
The SR-009 hand selected thin-film diaphragm as well as fixed electrodes machined through three-layer stainless etching using heat diffusion has been employed for the SR-L700 sound element. Thus, rich deep bass response, delicate high frequency and soothing mid-range has been achieved in a balanced sound.
The headband (ARC) assembly of the SR-L700 is equipped with 10-click slider mechanism for head pad height adjustment adopted from SR-009. Once adjusted, the slider always maintains its optimal position to make readjustment unnecessary. This enables you to enjoy hours of pleasant music listening with utmost comfort.
6NCu high purity 99.99999% copper wires are employed for the core wires, and six silver plated high purity 99.9999% copper wires are arranged for the perimeter. The whole cable uses the conventional wide format parallel structure to lower the capacitance between each wires and finished with the most suitable structure to drive the earspeaker.
New earpad design is carefully hand crafted with genuine lamb leather for utmost comfort for hours of music enjoyment as well as sound performance.
The STAX SR-L700MkII...electrostatic earspeakers are something quite new, at least to me, as they represent my first hearing of an electrostatic earspeaker/headphone. The experience has been, at the very least, a revelation and, at most, magical. As I write the conclusion, I am still listening to music. Sophie Hunger's Headlights (Rules of Fire, Two Gentlemen) plays and I am fooled again, as I turn to see where a particular sound has come from....The STAX SR-L700MkII will also bring you closer to your music than you may have ever imagined possible And in so doing, you will rediscover that which you believed you knew, over and over again. It'll take your breath away! A Best of 2021!
|Type||Push-Pull Open Back Oval Electrostatic Earspeaker Headphone|
|Frequency Response||7 - 41,000Hz|
|Electrostatic Capacitance||110pF (including cable)|
|Impedance||145k Ω (including cable, at 10kHz)|
|Sound Pressure Sensitivity||101dB / 100V r.m.s. 1 kHz|
|Maximum Sound Pressure||118dB / 400Hz|
|Bias Voltage||580V DC|
|Left & Right Identification||"L" and "R" indicated on the arc assembly Left channel cable is marked with a solid line. Right channel is marked with a dotted line.|
|Ear Pads||Genuine Lamb Leather (direct skin contact), high-quality synthetic leather (surrounding portion)|
|Cable||Silver-coated 6N (99.9999%) OFC parallel 6-strand, low-capacity special wide cable, 2.5m full length|
|Weight||0.8lb without cable / 1.1lb with cable|
STAX SRM-D10 Battery-Powered Electrostatic Headphone Amp/DAC
The SRM-D10 is the world's first compact electrostatic amp/DAC. Now, you can enjoy the freedom of using all modern Stax electrostatic headphones (PRO bias) anywhere you go. The built-in high-resolution DAC is capable playing up to DSD128 files.
- Compact electrostatic headphone amp/DAC
- Battery-powered, rechargeable Li-ion built-in battery pack
- High-resoluton Digital-to-Analog converter, supports up to DSD128
- User selectable line-in and USB DAC
- All-aluminum chassis
|Inputs||MicroUSB digital input, 3.5mm analog input|
|Output||5-pin PRO bias Stax earspeaker output|
|Supply voltage||DC 14V (charger included)|
|Frequency response||20Hz - 40KHz (+0dB,-3dB)|
|Rated input level||230mV (100V output)|
|Harmonic distortion||<0.025% / 1KHz-10KHz|
|Input impedance||10 KΩ (analog input)|
|Maximum output voltage||200Vr.m.s / 100Hz-10KHz|
|Power consumption||6.4W (USB input) 5W (analog input)|
|Recommended operating temperature||0-35°C, <90% RH (No condensation)|
|Dimensions||75(W) X 32(H) X 141(D) mm|
|Warranty||1-year U.S. limited warranty|