STAX Authorized Web Dealer!
This item not eligible for any further discount offers!
SPECIAL NOTE: Specifications: 120V, U.S. Version, 1 Year Parts & Labor Warranty. NOTE: All units available on Japanese websites are the 100volt for Japan only models. They have no warranty in the USA, are a potential fire hazard and will have significantly shortened lives due to the 20% over voltage by USA 120V power!!!
The STAX SR-L500 and SRM-353X Combo features sound quality and retrieval of inner detail that is simply stunning! This results in a rich deep bass-response, delicate high-frequencies and soothing mid-range all in a balanced manner.
SR-L500 Headphones:
The first Lambda series was introduced in 1979. 2015 ushers in a newly designed and advanced Lambda series Earspeaker, the SR-L500! The SR-L500 features rich deep bass-response, delicate high-frequency and soothing mid-range all in a balanced manner.
Top-Quality Sound Element:
Strictly selected thin-film diaphragm as well as tough stainless fixed electrodes have also been employed for the SR-L500. Thus rich deep bass-response, delicate high-frequency and soothing mid-range have been realized in a balanced manner.
Click-Type Arc Assembly:
The arc assembly of the SR-L500 is equipped with 10-click slider mechanism for head-pad height adjustment. Once adjusted, the slider always maintains its optimal position to make its readjustment unnecessary. This enables you to enjoy hours of pleasant listening to music with optimal wear comfort.
New Low-Capacitance HiFC Wide Cable:
High-performance new HiFC cable has been employed for the core wires. The whole cable uses the conventional wide parallel structure to lower the capacitance between each wire strand. This further improves the "freshness of sound."
High-Quality Artificial Leather Ear Pad:
The high-quality flexible artificial leather ear pad contributes not only to improve the wear feeling, but also to enhance the "freshness of sound" and "the grace of sound."
SR-L500 Headphones Specifications:
Type: Push-pull electrostatic, oval sound element, rear open-air type enclosure
Frequency Response: 7-41,000Hz
Electrostatic Capacitance: 110pF (including attached cable)
Impedance: 145kOhms (including attached cable, at 10kHz)
Sound Pressure Sensitivity: 101dB / Input 100Vr.m.s. / 1kHz
Maximum Sound Pressure Level: 118dB / 400Hz
Bias Voltage: 580V DC
Ear Pad: High-Quality Artificial Leather
Cable: Parallel 6-strand, 2.5m full length, low-capacity special wide HiFC cable
Weight: 465g (including attached cable), 339g (without cable)
1 Year Parts and Labor Warranty.
SRM-353X Headphone Amp:
The STAX SRM-353X Headphone Amp is made from carefully selected high-quality parts resulting in wide frequency response, natural tonal quality and extended dynamic range at high frequencies! Carefully selected high-quality parts of an audio grade further improve the tone quality, and re-examination of circuit details realized much wider frequency response. XLR input terminal provided to connect to the balanced output of audio equipment taking advantage of tis superior performance.
SRM-353X Headphone Amp Features:
• Original low-noise dual FET at first stage and all-stage direct coupling Class-A DC amplifier configuration with no coupling capacitor produces natural tone quality with loads of detail.
• Improved emitter follower at output stage has enabled wide-range reproduction resulting in both extended dynamic range at high frequencies and improved tonal quality.
• In additional to RCA input terminal, XLR balanced input terminal is provided to connect to a wide range of audio equipment. *Please note: The RCA & XLR inputs cannot be connected simultaneously. Choose either RCA or XLR and keep the unused input clear.
• Custom-made 2-axis 4-gang volume controller is employed.
• Extravagant non-magnetic aluminum alloy chassis of STAX tradition is adopted.
• Components with little aging characteristics are selected carefully in consideration of tonal quality and performance.
SRM-353X Headphone Amp Specifications:
Frequency Response: DC-90kHz (when used with one SR-L series Earspeaker)
Rated Input Level: 100mV (at 100V output)
Gain: 60dB
Harmonic Distortion: 0.01% or less (with one SR-L500 at 100Vr.m.s. / 1kHz output)
Input Impedance: 50kOhm (RCA) / 50kOhm x 2 (XLR)
Input Terminal: RCA x 1 or XLR x 1 (alternative)
Maximum Output Voltage: 400Vr.m.s. / 1kHz
Standard Bias Voltage: DC580V
Mains Voltage: Different depending on the area.
Power Consumption: 30W
Operating Temperature/Humidity: 0 To 35 Degrees C / Less Than 90% (Non-Condensing)
Dimensions: 150W x 100H x 360D mm (protruding portion included)
Weight: 3.0kg
Others: Input-Bypassing Parallel Output (RCA)
1 Year Parts and Labor Warranty.
This item not eligible for any further discount offers!
SPECIAL NOTE: Specifications: 120V, U.S. Version, 1 Year Parts & Labor Warranty. NOTE: All units available on Japanese websites are the 100volt for Japan only models. They have no warranty in the USA, are a potential fire hazard and will have significantly shortened lives due to the 20% over voltage by USA 120V power!!!
The STAX SR-L500 and SRM-353X Combo features sound quality and retrieval of inner detail that is simply stunning! This results in a rich deep bass-response, delicate high-frequencies and soothing mid-range all in a balanced manner.
SR-L500 Headphones:
The first Lambda series was introduced in 1979. 2015 ushers in a newly designed and advanced Lambda series Earspeaker, the SR-L500! The SR-L500 features rich deep bass-response, delicate high-frequency and soothing mid-range all in a balanced manner.
Top-Quality Sound Element:
Strictly selected thin-film diaphragm as well as tough stainless fixed electrodes have also been employed for the SR-L500. Thus rich deep bass-response, delicate high-frequency and soothing mid-range have been realized in a balanced manner.
Click-Type Arc Assembly:
The arc assembly of the SR-L500 is equipped with 10-click slider mechanism for head-pad height adjustment. Once adjusted, the slider always maintains its optimal position to make its readjustment unnecessary. This enables you to enjoy hours of pleasant listening to music with optimal wear comfort.
New Low-Capacitance HiFC Wide Cable:
High-performance new HiFC cable has been employed for the core wires. The whole cable uses the conventional wide parallel structure to lower the capacitance between each wire strand. This further improves the "freshness of sound."
High-Quality Artificial Leather Ear Pad:
The high-quality flexible artificial leather ear pad contributes not only to improve the wear feeling, but also to enhance the "freshness of sound" and "the grace of sound."
SR-L500 Headphones Specifications:
Type: Push-pull electrostatic, oval sound element, rear open-air type enclosure
Frequency Response: 7-41,000Hz
Electrostatic Capacitance: 110pF (including attached cable)
Impedance: 145kOhms (including attached cable, at 10kHz)
Sound Pressure Sensitivity: 101dB / Input 100Vr.m.s. / 1kHz
Maximum Sound Pressure Level: 118dB / 400Hz
Bias Voltage: 580V DC
Ear Pad: High-Quality Artificial Leather
Cable: Parallel 6-strand, 2.5m full length, low-capacity special wide HiFC cable
Weight: 465g (including attached cable), 339g (without cable)
1 Year Parts and Labor Warranty.
SRM-353X Headphone Amp:
The STAX SRM-353X Headphone Amp is made from carefully selected high-quality parts resulting in wide frequency response, natural tonal quality and extended dynamic range at high frequencies! Carefully selected high-quality parts of an audio grade further improve the tone quality, and re-examination of circuit details realized much wider frequency response. XLR input terminal provided to connect to the balanced output of audio equipment taking advantage of tis superior performance.
SRM-353X Headphone Amp Features:
• Original low-noise dual FET at first stage and all-stage direct coupling Class-A DC amplifier configuration with no coupling capacitor produces natural tone quality with loads of detail.
• Improved emitter follower at output stage has enabled wide-range reproduction resulting in both extended dynamic range at high frequencies and improved tonal quality.
• In additional to RCA input terminal, XLR balanced input terminal is provided to connect to a wide range of audio equipment. *Please note: The RCA & XLR inputs cannot be connected simultaneously. Choose either RCA or XLR and keep the unused input clear.
• Custom-made 2-axis 4-gang volume controller is employed.
• Extravagant non-magnetic aluminum alloy chassis of STAX tradition is adopted.
• Components with little aging characteristics are selected carefully in consideration of tonal quality and performance.
SRM-353X Headphone Amp Specifications:
Frequency Response: DC-90kHz (when used with one SR-L series Earspeaker)
Rated Input Level: 100mV (at 100V output)
Gain: 60dB
Harmonic Distortion: 0.01% or less (with one SR-L500 at 100Vr.m.s. / 1kHz output)
Input Impedance: 50kOhm (RCA) / 50kOhm x 2 (XLR)
Input Terminal: RCA x 1 or XLR x 1 (alternative)
Maximum Output Voltage: 400Vr.m.s. / 1kHz
Standard Bias Voltage: DC580V
Mains Voltage: Different depending on the area.
Power Consumption: 30W
Operating Temperature/Humidity: 0 To 35 Degrees C / Less Than 90% (Non-Condensing)
Dimensions: 150W x 100H x 360D mm (protruding portion included)
Weight: 3.0kg
Others: Input-Bypassing Parallel Output (RCA)
1 Year Parts and Labor Warranty.
